Loading ...
Loading ...
Loading ...
16
3.7 Adjusting the Rated Current
The MaxiCharger AC Elite (commercial) allows you to manually set a lower maximum current using a current
selector when installing the charger on a circuit rated lower than the maximum rating for the charger.
1. Remove the covers and locate the current selector.
2. Use a flathead screwdriver to set the rotary switch to
the appropriate position per the table below.
3. When the current of the charger is set lower than the
maximum rating, choose the correct current value
from the Amperage Labels and affix it over the
existing label on the charger.
Position Amperage (A) Circuit Breaker Rating
0 Not in Use N/A
1 16 20
2 24 30
3 32 40
4 40 50
5 48 60
6 50 70
7 Not in Use N/A
8 Not in Use N/A
9 Not in Use N/A
NOTE
When the rotary switch is at 0, 7, 8 or 9, the corresponding amperage will be 16, 50, 50, and 50, respectively.
CAUTION
To reduce the risk of fire, only connect your charger to a circuit with a branch circuit over-current protection
of 125% of the selected maximum amperage setting of the device in accordance with ANSI/NFPA 70 (US) CSA
C22.1 (Canada).
Loading ...
Loading ...
Loading ...