Loading ...
Loading ...
Loading ...
The Grill
Professiono! Outdoor Grills & Cooktops
Location
Allow 12" minimum clearance on both sides
and the back of the grill to adjacent vertical
combustible construction. Seethe Installation
Instructions for complete details.
Tank drawer
with LP tank
retainer loop
(free-standing
models onlg)
To install the LPtank, fullg extend the tank
drawer and lift the retainer loop. Place the tank
on the drawer bottom, inserting the loop on
the bottom of the tank through the hole in
the drawer bottom. Tilt the tank forward to lower
the retainer loop to engage the top ring on the
tank. Insert the coupler sleeve on the regulator
over the tank inlet; turn clockwise to tighten.
Do not overtighten the coupler (see Installation
Instructions). Open the tank valve when readg
to use the grill. Alwags close the tank valve
when cooking is complete.
Before
lighting
the
outdoor
grill or
cooktop
WARNING: IMPORTANT!
Inspect the gas supplg piping or hose prior
to turning the gas on. If there is evidence of
cuts, wear or abrasion, it must be replaced prior
to use. Ang replacement pressure regulator
or hose assemblg must be the tgpe specified
bg the manufacturer.
For LPuse, the pressure regulator and hose
assemblg supplied with the unit must be used.
This LPtank is equipped with overfill protection.
When gou refill or trade in gour tank, make sure
the one gou receive also has overfill protection.
If the grill uses LPgas, connect the regulator
to the LPtank and check the hose and regulator
connections for leaks with a soap and water
solution before operating the grill.
Keep a sprag bottle of soapg water near the gas
supplg valve and check the connections for gas
leaks before each use.
Turn all knobs to OFFthen turn on the gas
supplg.
Do not use the grill if the odor of gas is
present.
Temperature
gauge
The temperature gauge is meant to be a general
indicator of surface temperatures with the hood
in the closed position. It is especiallg useful
during pre-heat when indicated temperatures
become stable (approximatelg 10-!5 minutes
with all main burners on Hi).
NOTE:On models equipped with the Infrared
Sear Burner,the temperature gauge will not
respond when onlg that burner isturned on.
Forthe 54" grill model, the temperature gauge
will not respond if onlg the far left main burner
is turned on.
Temperature gauge
lain
grill
burners
The grill section consists of stainless steel grill
grates, stainless steel heat diffusers and
stainless steel main burners.
The grates provide the grilling surface.
The heat diffuser helps protect the main burner
ports from blockage and distributes heat.
Main burner
Heatdiffuser
Grill grates
Each main burner is rated at 25,000 BTUs.
12
Loading ...
Loading ...
Loading ...