SDS-5000X-16LA Manual

Loading ...

SDS5000X Series Digital Oscilloscope User Manual

 State can be selected in the hexadecimal range

of 0x0 to 0xF. If the value is selected as "0xX",

the state is ignored.

 Compare Type can be specified as Equal, Not

Equal, Less than, Less or Equal, Greater than,

Greater or Equal, in Range of, out of Range.

 At Pos determines the start position of the trigger

data. If selected as Value, you need to set Nibble

Pos in the decimal range of 0 to 5. If selected as

Don’t care, the oscilloscope will be triggered at

the first data which matches the specified

condition.

 Nibble Len can be selected in the decimal range

of 1 to 6. It is associated with the Nibble Pos.

 Data can be selected in hex. The range is

associated with the Nibble Pos. If the data is

selected as "0xXX", the data is ignored.

Slow Channel — the oscilloscope will be triggered on a Slow Channel

Message.

Frame (short serial message) — The 16-bit message consists of a 4 bit

Message ID nibble, 2 nibbles (1 byte) of data, and a CRC checksum nibble. If

ID and data match, then trigger on the end of CRC bit.

Loading ...

Siglent SDS-5000X-16LA MSO/Digital activation license (SDS5000X series)