Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 95
Cleat Removal (Without Tonneau Cover)
Remove the end cap by pushing upward on the
release button located beneath the end cap while
pulling the cap away from the rail. The cleat can
now be removed by sliding it off the end of the rail.
End Cap Release Button If Not Equipped With
Tonneau Cover
Pull End Cap Away From Rail
EASY-OFF TAILGATE
To simplify mounting of a camper unit with an
overhang, the tailgate can be removed.
NOTE:
The electric connector at the bottom of the tailgate
must be disconnected prior to removing the
tailgate.
DISCONNECTING THE REAR CAMERA
A
ND REMOTE KEYLESS ENTRY
1. Open the tailgate to access the rear camera
or Remote Keyless Entry connector bracket
located on the rear sill.
Connector Bracket Location
2. Remove the connector bracket from the sill by
pushing inward in the locking tab.
Locking Tab
3. Disconnect the chassis wiring harness,
ensuring the connector bracket does not fall
into the sill.
4. Connect the chassis plug and bracket
(provided in the glove compartment) to the
chassis wiring harness and insert the bracket
back into the sill.
5. Connect the tailgate plug (provided in the
glove compartment) to the tailgate wiring
harness to ensure that the terminals do not
corrode.
6. Tape the tailgate harness and bracket against
the forward-facing surface of the tailgate.
This will prevent damaging the connector and
bracket when storing or reinstalling the
tailgate.
2
20_DJD2_OM_EN_USC_t.book Page 95
Loading ...
Loading ...
Loading ...