Loading ...
Loading ...
Loading ...
STARTING AND OPERATING 259
6. Secure to the anchor point. Once you have
established your anchor point, secure the
tree-trunk protector or choker-chain around
the object.
Tree Trunk Protector
NOTE:
How to choose an anchor point: A secure anchor is
critical to winching operations. An anchor must be
strong enough to hold while winching. Natural
anchors include trees, stumps and rocks. Hook the
cable as low as possible. If no natural anchors are
available when recovering another vehicle, your
vehicle becomes the anchor point. In this case, be
sure to put the transmission in NEUTRAL, apply the
hand brake and block its wheels to prevent your
vehicle from moving. Ideally, you'll want an anchor
point that will enable you to pull straight in the
direction the vehicle will move. This allows the
synthetic rope to wind tightly and evenly onto the
spooling drum. An anchor point as far away as
possible will provide the winch with its greatest
pulling power.
7. Attach the Clevis/D-Shackle and Tree Trunk
Protector. Attach the shackle to the two ends
of the strap or chain and through the hook,
being careful not to over tighten (tighten and
back-off 1/2 turn).
Clevis/D-Shackles
8. Lock the clutch. Lock the winch drum by
rotating the clutch lever on the winch to
engage.
NOTE:
Always ensure the clutch is fully engaged or
disengaged.
9. Connect the remote control to the winch
control box, located on the front bumper.
Be careful not to let the remote control cord
dangle in front of the winch. If you choose to
control the winch from inside your vehicle,
always pass the remote through a window to
avoid pinching the cord in the door. Always
disconnect the remote control when not in use.
Winch Box Remote Control Connector
CAUTION!
Always be certain the anchor you select will
withstand the load.
5
20_DJD2_OM_EN_USC_t.book Page 259
Loading ...
Loading ...
Loading ...