Loading ...
Loading ...
Loading ...
BEFORE YOU CALL FOR S_:RV|CE
Please check the %llowing be%re calling %r service. It may save you time and expense.
SOLUTIOH
1 * Make sure the power cord is tightly"
connected to the outlet.
• Check house lights to be sure. Call your
local electric company for service.
• Fuse/circuit breaker at home doesn't work. * Replace the fuse or reset the circuit breaker.
• Range is in Demo Mode. * See page 41 for hou to cancel Demo Mode.
2 Surface units do not * No power to the appliance. * See SOLI_ TION for PROBLEM 1.
heat. * Surface controls improperly set. * Check if the controls have been properly
set. See page 15.
3 Surface units too hot or * Improper cookware being used. * Use pans which are flat and match the
not hot enough, diameter of the surface unit selected.
4 Surface unit stops * It is normal when turned to a lower setting.
glowing.
5 Scratches on glass * Incorrect cleaning methods were used. * Use the recommended cleaning procedure.
ceramic cooktop. See page 42-43.
• Cookuare uith rough bottom has been * Use smooth, flat-bottomed cookxxare.
used.
6 Areas of discoloration * Food spillovers not cleaned before next use. * Use the recommended cleaning procedure.
on the cooktop. See page 42-43.
7 Metal marks on * Sliding or scraping of metal pans on top. * Do not slide metal pans. When cool, clean
cooktop, with cooktop cleaning cream to remove the
marks.
8 Brown streaks or specks * Boilovers are cooked onto surface. * Use the recommended cleaning procedure.
on cooktop glass surface. See page 42-43.
9 Food in Microwave * No power to the appliance. * See SOLUTION for PROBLEM 1.
Drawer is not heated. * Drawer controls improperly set. * Check if the controls have been properly
set. See page 18-19.
• Range is in Demo Mode. * See page 41.
.10 Microx_ave Drauer light * Light bulb is loose or burned out. * Call for service.
does not work.
.1.1 Oven does not work. * No power to the appliance. * See SOLUTION for PROBLEM 1.
• Oven controls improperly set. * Check if the controls have been properly
PROBLEM
Part or all of range
does not operate.
set. See page 30-38.
* Allow the oven to cool below locking
temperature and then reset to the desired
setting/temperature.
* See page 41.
* Tighten or replace the bulb.
POSSIBLE CAUSE
* Power cord of range is not completely
connected to the electrical outlet.
* Poxxer outage.
* Oven too hot.
* Range is in Demo Mode.
.1'/_ Oven light does not * Light bulb is loose or burned out.
work.
"13 Touch controls will not * Control Lock is on. * See page 40 to unlock.
operate.
45
Loading ...
Loading ...
Loading ...