Loading ...
Loading ...
Loading ...
MICROWAVE DRAWER COOKING
MULTIPLE Se:QLtENCE COOKING
The Microwave Drawer can be programmed for up to four automatic cooking sequences, switching from one power level setting
to another automatically. Sometimes cooking directions tell you to start on one power level and then change to a different power
level. Your oven can do this automatically.
Suppose you want to cook roast beef for 5 minutes at 70% power and then continue to cook for 30 minutes at 50% power.
"1Enter cooking time by touching 2 Touch Power Level 3 times to choose 3 Note that 100% stage 2 appears in the
number pads [_[_[_. 70%. You can omit this step when you set banner.
100% power. Touch Multiple Sequence.
Ti_e _4 S_
4 Enter second cooking time E_E_E_E_. 5 Touch Power Level until 50% Stage 2
appears in the display. Touch START.
6 The display will begin counting down
the total cooking time.
During cooking, the power level will
appear in the display. At the end of
Stage 1,the microwave will automatically
change to Stage 2.
TO SET POWER LEVEl.
There are eleven preset power levels.
Using lower power levels increases the cooking time, which is recommended for foods such as cheese, milk and long slow
cooking of meats. Consult a microwave cookbook or recipes for specific recommendations.
TOUCH POWER APPROXIMATE COMMON TOUCH POWER APPROXIMATE COMMON
LEVEL PAl:)NUMBER PERCENTAGE WORDS FOR LEVEL PAl:) NUMBER PERCEHTAGE WORDS FOR
OF TIMES FOR OF POWER POWER LEVELS OF TIMES FOR OF POWER POWER LEVELS
DESIRED POWER DESIRED POWER
If Power Level is not touched 100% High Power Level × 6 40%
Power Level × 1 90% Power Level × 7 30% Med Low/Defrost
Power Leve] x 2 80% Power Leve] x 8 20%
Power Leve] x 3 70% Medium High Power Leve] x 9 10% Low
Power Leve] x 4 60% Power Leve] x 10 0%
Power Leve] x 5 50% Medium Power Leve] x 11 100% High
19
Loading ...
Loading ...
Loading ...