Loading ...
Loading ...
Loading ...
- 5 -
01/2023
2023, .
• In order to open and remove the lid, push and hold down the button on
the side of the lid and tilt open the lid from the milk tank.
• Pour fresh, cold milk into the milk tank no higher than the MAX mark.
Always fill to between the maximum and minimum level marks.
• The lid can only be put on in one way. Seat the side of the lid with the
milk nozzle on to the side of the tank with the cut-out for the nozzle
and tilt down the lid. Correct placement is indicated by aclick. Check
that the lid is not moving and does not extend past the edge of the
tank .
• Insert the milk tank with the attached lid into the appliance from the
side until you hear aclick. Check that the milk tank with lid is correctly
inserted and is not moving in any way.
Note:
In the event that you do not use up all the milk, it is
necessary to pour it out of the tank into asuitable container
and to store it in arefrigerator. Then thoroughly clean the
milk tank according to the instructions in chapter "Cleaning
and maintenance".
Inserting and removing the strainer
• Insert the selected strainer into the portafilter and push it in firmly.
• To remove the strainer from the portafilter, use your nail or athin object
(e.g. table knife) inserted between the edge of the filter and the edge
of the portafilter.
Filling the strainer and tamping down the coffee
• Place the portafilter on to an even surface and pour the corresponding
amount of ground coffee into the strainer. The one-cup coffee strainer
is filled with asingle level measuring cup of coffee. The two-cup coffee
strainer is filled with double the amount of coffee. One level measuring
cup is equivalent to approx. 7 g of ground coffee. Spread the coffee out
evenly inside the strainer and gently tamp it down with the flat end of
the measuring cup.
• Thoroughly clean all remains of ground coffee from the edge of the
strainer.
Note:
Only use ground coffee intended for use in espresso
machines.
Do not use ground coffee intended for use in aFrench
press, percolator, etc.
Inserting and removing the portafilter
• Insert the portafilter underneath the brew head so that the handle
points to the left and is aligned with the
symbol on the brew
head. To fasten the portafilter to the brew head, turn the handle to the
right to the position marked with the
symbol.
• To remove the portafilter from the brew head, turn the handle to the
left to the
symbol. Remove it from the brew head and move it
above arubbish bin. Turn the portafilter so that the strainer with the
spent coffee points downwards. Use ateaspoon to remove the coffee
grounds. Avoid coming into contact with the surface of the strainer or
portafilter as they may still be hot. Prior to removing the strainer from
the portafilter, cool it down under cold running water. Then rinse the
strainer and the portafilter under clean running water and dry them
thoroughly.
Warming the cups
• As soon as the appliance is turned on using the ON/OFF button, the
cup warming surface will automatically start to heat up. Place empty
coffee cups upside down on to surface and allow them to warm up.
Preheating the espresso machine
1. Check that the espresso machine is correctly assembled.
2. Press button the ON/OFF button to turn on the espresso machine.
3. The ON/OFF button will start flashing and the espresso machine
will heat up.
4. When the ON/OFF button lights up, two beeps will be made and the
espresso machine is ready for use. The espresso machine will stop
heating. The SINGLE icon will start flashing on the display. Now you
can use the SET control knob to select your favourite beverage.
Note:
The espresso machine will automatically turn off after
30minutes of inactivity. This is normal.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BREWING COFFEE
• The appliance is supplied with 2 stainless steel strainers: astrainer for
brewing 1 cup of coffee and astrainer for brewing 2 cups of coffee.
• The strainer for brewing 1 cup is suitable for brewing 1 espresso,
astandard cappuccino or latté macchiato.
• The two-cup strainer is suitable for brewing adouble espresso, two
espressos, astrong cappuccino or latté macchiato "SINGLE" or
"DOUBLE" will start flashing on the display.
Brewing an espresso
1. Place the one-cup or two-cup strainer into the portafilter, tamp down
the coffee and insert the portafilter into the brew head.
2. Turn on the espresso machine by pressing the ON/OFF button and
allow it to preheat.
3. Place acup or mug underneath the portafilter.
4. Turn the control knob and select "SINGLE" (to brew 1 cup) or
"DOUBLE" (to brew 2 cups). "SINGLE" or "DOUBLE" will start
flashing on the display.
5. Press the START/STOP button and the espresso machine will start.
The START/STOP button will be lit.
6. First, the coffee is steamed, aprocess where the espresso machine
releases asmall amount of coffee into the strainer to allow the
ground coffee to swell in the strainer. After afew moments, the full
coffee extraction process will commence.
7. About 40 ml of coffee (when 1 cup is brewed) or about 80ml (when
2 cups are brewed) will flow into the cup/mug.
8. The dispensing of the coffee will stop automatically. One beep will
be made and the START/STOP button will turn off. The espresso
machine will switch to the stand-by mode.
9. Remove the portafilter from the brew head and clean it out according
to the instructions in the section "Cleaning and maintenance". We
recommend waiting approx. 5 seconds before taking the portafilter
out of the brew head. Pressure will be released naturally, which will
make the removal of the portafilter easier.
10. If you need to stop the dispensing of the coffee sooner, press the
START/STOP button again.
Note:
When brewing coffee into very small cups, tilt out the tray
and place the cup on it. In this way you will prevent coffee
from splashing as aresult of flowing from alarge height into
the cup. When you have finished using the tray, tilt it back
towards the espresso machine.
Brewing cappuccino
1. Fill the milk tank with cold, fresh milk according to the instructions in
section "Filling the milk tank".
2. Place the one-cup strainer into the portafilter, tamp down the coffee
and insert the portafilter into the brew head.
3. Turn on the espresso machine by pressing the ON/OFF button and
allow it to preheat.
4. Place acappuccino cup underneath the portafilter.
5. Turn the lever on the side of the milk tank and slide out the milk
nozzle. Ensure that it is pointing into the cup.
6. Turn the control knob to select "CAPPUCCINO". "CAPPUCCINO" will
start flashing on the display.
7. Press the START/STOP button and the espresso machine will start.
The START/STOP button will be lit.
8. First, the milk will be heated up and frothed, and it will flow out of
the nozzle into the cup. The display will show the default amount of
frothed milk. Turn the knob on the lid of the milk tank to determine
the amount of frothed milk. Turning to the right increases the amount
of frothed milk, turning to the left reduces the amount of frothed milk.
It is possible to turn the knob also during the dispensing of the hot
milk.
9. As soon as the preset amount of milk and frothed milk has flown
into the cup, the coffee extraction process will start and coffee will
start flowing into the cup. The display will show the default amount
coffee.
Loading ...
Loading ...
Loading ...