Loading ...
Loading ...
Loading ...
- 3 -
01/2023
2023, .
• Before connecting the appliance to apower socket, check that the rated voltage on its rating label matches the electrical voltage in the power
socket.
• Connect the appliance only to aproperly grounded socket. For safety reasons, we do not recommend using multi-socket adapters or extension
cords.
• Do not place the appliance on window sills, kitchen sink drainboards or unstable surfaces. Always place it on astable, even and dry surface.
• Do not place the appliance on or near an electrical or gas stove, or in the vicinity of an open flame.
• Never use the appliance in the near vicinity of abath, shower or swimming pool.
• Use the appliance only for the purposes for which it was designed.
• Only use the appliance with the original accessories that came with it.
• To ensure sufficient air circulation, free space of at least 15 cm must be maintained around and above the appliance when it is running.
• Only use the top surface of the appliance for warming cups. Do not use it as astorage rack.
• Fill the water tank with clean cold water. Do not pour hot water or other liquids into it or place any items inside it.
• Before turning on the appliance, check that:
– the drip tray together with the grate is installed in position;
– the water tank is filled with asufficient amount of water and is properly installed in position. The water level must not exceed the maximum mark.
• Before you begin brewing coffee, check that the portafilter is properly attached to the brew head. Pressure is created in the portafilter during the
coffee steaming process, so do not move it while it is running. Otherwise, this could result in adangerous situation.
• When operating the appliance, be especially careful to avoid scalding by boiling water or steam.
• Regularly inspect the water level in the water tank when using the appliance. When the water level falls below the minimum water level mark, add
water. Before adding water, first turn the appliance off and disconnect it from the power socket.
• To protect the pump from damage, the appliance is equipped with abuilt-in thermal fuse that will disengage it when it runs empty. In the event that
such asituation occurs, disconnect the power cord from the power socket and allow the appliance to cool down for at least 30 minutes. Then you
may continue using it.
• Always turn off the appliance and disconnect it from the power socket when not using it, when leaving it without supervision, before disassembling
or assembling it, before filling up the water tank, and before moving or cleaning it. Allow the appliance to cool down before cleaning or moving it. Do
not move the appliance with acoffee cup located on the drip tray grate or with cups located on the cup warming surface.
• Keep the appliance and its accessories in clean condition. Clean and maintain it according to the instructions in chapter Cleaning and maintenance.
Never wash the appliance under running water or submerge it in water or another liquid.
• Make sure that the power cord does not come into contact with ahot surface and prevent the power plug from coming into contact with water.
• Disconnect the appliance from the power socket by pulling on the plug, never pulling on the power cord. Otherwise, this could damage the power
cord or the socket.
• To avoid the danger of injury by electrical shock, do not repair the appliance yourself or make any adjustments to it. Have all repairs or adjustments
performed at an authorised service centre. By tampering with the appliance, you risk voiding your legal rights arising from unsatisfactory
performance or quality warranty.
Loading ...
Loading ...
Loading ...