Loading ...
Loading ...
Loading ...
17
English
7. Follow the steps below to re-attach to the oven door
(Fig. 30):
− Insert the hinge into the top slot as shown in Fig 30
a
.
− Open the door to its fully open position as shown
in Fig 30
b
. Ensure the hinge buckle has released from
the lever as shown in Fig 30
c
.
b
Hinge
Lever
c
a
Fig. 30
Cleaning the Storage Drawer
1. Lift the left small hook upward, at the same time, push the
right small hook downward. (Fig. 31)
Fig. 31
2. Pull the drawer out.
3. To replace the drawer, align the drawer with the rails and
push inward.
NOTE: Do not store flammable material in the oven or in the
bottom drawer.
Replacing the Oven Light
WARNING
ELECTRIC SHOCK HAZARD
● Disconnect electrical power before servicing.
● Replace all parts and panels before operating.
● Failure to do so can result in death or electrical
shock.
● Let the oven cavity and broil burner cool down.
● Switch off the electric supply.
● Remove the light cover by rotating to the left. (Fig. 32)
Fig. 32
● Unscrew and replace the halogen bulb with a new one
suitable for high temperature (300°C ~ 570°C) having the
same specifications: 240V 60Hz, 25W, G9.
● Replace the protective cover.
NOTE: Oven bulb replacement is not covered by your
guarantee.
Troubleshooting
Problem Possible Cause
Surface units will not maintain a
rolling boil or frying rate is not fast
enough
● You must use pans that are absolutely flat.
● Pan bottoms should closely match the diameter of the surface unit selected.
● The control knob is to low of setting.
Surface units do not operate
● You have blown a household fuse or tripped a circuit breaker.
● You have not set the control knobs correctly.
Control knobs will not turn
● If it is a surface unit control knob, you are not pushing in before turning.
● If it is oven control knob, you are trying to turn the knob in the wrong direction.
Oven light does not work
● Light bulb is loose or has burned out.
● Oven function knob was set to OFF.
Oven does not work
● You have blown a household fuse or tripped a circuit breaker.
● You have not set the control knobs correctly:
− Oven function knob was set to OFF. Select the light function on the control
panel.
− Oven thermostat knob was set to OFF.
Loading ...
Loading ...
Loading ...