Loading ...
Loading ...
Loading ...
ASSEMBLY GUIDE
ATTACH THE FRONT MAIN FRAME
TO THE REAR MAIN FRAME
1. Connect the Front Main Frame (C) to the Rear Main Frame (A)
using 1 bolt, 2 washers, and 1 locknut (R).
ATTACH THE FRONT & REAR STABILIZERS
TO THE FRONT & REAR MAIN FRAMES
1. Insert the Front Stabilizer (D) into the Front Main Frame (C) and
attach using 3 bolts and 3 washers (P).
2. Insert the Rear Stabilizer (B) into the Rear Main Frame (A) and
attach using 3 bolts and 3 washers (P).
8 SculptTrainer Lite User Manual Lifepro Strength Training Collection 9
1
AC
R
2
ATTACH THE PADDED ROLLERS
TO THE FRONT MAIN FRAME
1. Position the Roller Mount (G) onto the Front Main Frame (C) and
place the Iron Bracket (K) on the opposite side. Attach using 2 bolts,
4 washers, and 2 nuts (S). Note: Insert bolts on Iron Bracket side.
2. Attach the Adjustment Knob (L) by partially screwing it into the
threaded hole at the top of the Front Main Frame (C). Note: Do not
fully tighten the Adjustment Knob in this step.
3. Insert the Locking Pin (M) into the hole at the top of the Rear Main
Frame (A) until you hear a click, indicating that it is locked in place.
4. Insert the Roller Tube (I) into the hole in the Roller Mount (G),
distributing the length of the Roller Tube (I) evenly on both sides.
5. Slide the Padded Rollers (H) onto each end of the Roller Tube (I) until
they butt up against the Roller Mount (G). Ensure that the ends of the
Roller Tube (I) are flush with the ends of the Padded Rollers (H).
3
C
G
K
G
H
H
I
S
D
C
A
B
x3 Bolts
(P)
x3 Bolts
(P)
M
L
A
R
(x1)
M10x70mm Bolt +
Washers + Locknut
*Place 1 washer under bolt head
and 1 washer under locknut
P
M10x16mm Bolt +
Washer
(x6)
S
(x2)
M10x70mm Bolt +
Washers + Nut
*Place 1 washer
under each bolt head
and 1 washer
under each nut
Loading ...
Loading ...
Loading ...