Loading ...
Loading ...
Loading ...
Installation Instructions
@
PREPARE THE PEDESTAL
Pull the drawer
out as far as it
will go.
Remove
screws from
drawer slides.
Slide drawer
out of the /
base and set
aside.
FOR DRYERS ONLY:
DLocate the 4 support pads from the parts
package. Each pad has 2 protrusions that fit
into the holes on top of the pedestal. Press the
rubber pads into each set of corner holes on
the top of the pedestal as shown.
II
@
NOTE: The support pads should be installed on the
dryer only. DO NOT INSTALL THESE PADS ON THE
WASHER PEDESTAL.
[]
@
D
INSTALL THE PEDESTAL TO THE
WASHER OR DRYER
Place the pedestal against the bottom of the
unit. Check to be sure the drawer front is at the
front of the washer.
Align the holes in the pedestal with the holes in
the bottom of the unit. Use a Phillips screwdriver
to install the 4 bolts through the pedestal and
into the unit-do not tighten.
Slide the pedestal toward the unit, until it is
aligned front to back. Use a7 mm socket
wrench to securely tighten the bolts.
44
Loading ...
Loading ...
Loading ...