Loading ...
Loading ...
Loading ...
Using the dryer.
Fabric Care Labels
Below are fabric care label "symbols" that affect the clothing you willbe laundering.
12
Wash Labels
cycle No_molP............tP,es_/ Ge,,tl_'_/ Do,,otwo_h Do,,otw,i,,g
wrinkle resistant delicate Hand wash
Front load Target
target water Category Water Temperature
Tap Cold Inlet Water Temperature
temperature Co_d 27°C/80°F
Warm 40°C/105°F
Hot 50°C/120°F
Sanitize 70°C/160°F
Automatic
Temperature Control
Not used
Used
Used
Used
Used
Dry Labels
dry
Dry Normal Permanent Press/
wrinkle resistant
bq
Gentle/
delicate
Do not tumble dry
Do not dry
(used with
do not wash)
.eat ® ®
setting
High Medium Low No heat/air
nPsetCiu°cltions
Line dry/ Drip dry Dry fiat In the shade
hang to dry
Bleach Labels
Bleach £ £
symbols AnybJeGch Only ...... hlorine bleach Do not bleach
(when needed) (when needed)
Care and Cleaning of the Dryer
Dryer Interior end Duct: The interior of
the appliance and exhaust duct should be
cleaned once a year by qualified service
personnel.
The Exterior: Wipe or dust any spills or
washing compounds with a damp cloth.
Dryer control panel and finishes may be
damaged by some laundry pretreatment
soil and stain remover products. Apply these
products away from the dryer. The fabric
may then be washed and dried normally.
Damage to your dryer caused by these
products is not covered by your warranty.
Do not touch the surface or the display with
sharp objects.
The Lint Filter: Clean the lint filter before
each use. Remove by pulling straight up.
Run your fingers across the filter. A waxy
buildup may form on the lint filter from
using dryer-added fabric softener sheets.
To remove this buildup, wash the lint screen
in warm, soapy water. Dry thoroughly and
replace. Do not operate the dryer without the
lint filter in place.
Vacuum the lint from the dryer lint filter if you
notice a change in dryer performance.
Stainless Steel: To clean stainless steel
surfaces, use a damp cloth with a mild,
nonabrasive cleaner suitable for stainless
steel surfaces. Remove the cleaner residue,
and then dry with a clean cloth.
The stainlesssteel used to make the dryer drum
provides the highest reliabilityavailable in a GE
dryer. If the dryer drum should be scratched or
dented during normal use,the drum will not rust
or corrode.Thesesurface blemisheswill not affect
the function or durability of the drum.
The Exhaust Hood: Check with a mirror that
the inside flaps of the hood move freely
when operating. Make sure that there is no
wildlife (birds, insects, etc.) nesting inside the
duct or hood.
Loading ...
Loading ...
Loading ...