Loading ...
Loading ...
Loading ...
Installation Instructions
STACKING THE WASHER AND
DRYER{if desired){cont.)
INSTALLING THE STACK BRACKET
KIT
KIT GE FL STACK CONTENTS
0 Right hand bracket 04 #12 x 1" screws
17Left hand bracket
A
174 #8 × 1/2" screws
04 rubber pads
TOOLS YOU WILL NEED
17Phillips screwdriver
17Gloves
ClOpen-ended wrench
C1Level
C1Pliers
INSTALLATION PREPARATION
Remove the packaging.
Flatten the product carton to use as a pad to
lay the dryer down on its side. Continue using
the carton to protect the finished floor in front of
the installation location.
[i] REMOVE THE DRYER LEVELING LEGS
A. Carefully lay the dryer on its side. Use the packing
material so you don't scratch the finish on the
dryer.
8. Use an open-end wrench or pliers to remove the
dryer leveling legs.
Back out and remove
all 4 leveling legs
[] INSTALL RUBBER PADS TO DRYER
BASE
Locate the 4 rubber pads in the parts package.
Remove the adhesive backing and firmly place
over on the bracket where you removed the
leveling legs.
41
Loading ...
Loading ...
Loading ...