Loading ...
Loading ...
Loading ...
Installation Instructions
SIDE VENTING:
Dryer Exhaust to right of cabinet for Electric
models only.
Dryer Exhaust to left of cabinet for Gas and
Electric models.
WARNING- BEFOREPERFORMING
THiS EXHAUST INSTALLATION, BE SURE TO
DISCONNECT THE DRYER FROM iTS ELECTRICAL
SUPPLY. PROTECT YOUR HANDS AND ARMS
FROM SHARP EDGES WHEN WORKING INSIDE
THE CABINET. BE SURE TO WEAR GLOVES.
Remove Right
screw
and save
Left
Remove desired
knockout (one only)
Detach and remove the bottom, right or left side
knockout as desired. Remove the screw inside the
dryer exhaust duct and save. Pull the duct out of
the dryer.
Fixing hole
Cut the duct as shown and keep portion A.
TAB LOCATION
Notfor gas
Bend tab
up 45 °
Through the rear opening, locate the tab in the
middle of the appliance base. Lift the tab to about
45°, using a flat-blade screwdriver.
ADDING A NEW DUCT
Fixing hole Portion "A"
Lef _..., _"_
exhaust ,..._
Reconnect the cut portion (A) of the duct to the
blower housing. Make sure that the shortened
duct is aligned with the tab in the base. Use the
screw saved previously to secure the duct in place
through the tab on the appliance base.
ADDING ELBOW AND DUCT FOR EXHAUST TO
LEFT OR RIGHT SIDE OF CABINET
nternal duct
Rear opening
Side opening
, Insert the 4" elbow through the rear opening and
connect the elbow to the dryer internal duct.
, Insert the 4" duct through the side opening and
connect it to the elbow.
A CAUTION: Donotpu,or damage the
electrical wires and do not remove the vinyl cover
from the electrical components inside the dryer
when inserting the duct. A slight interference may
occur between the exhaust and the wire
components.
29
Loading ...
Loading ...
Loading ...