Loading ...
Loading ...
Loading ...
30
J. Bin Control Adjustment
WARNING
• All parts are factory-adjusted. Improper adjustments may adversely affect safety,
performance, component life, and warranty coverage.
• In Hoshizaki DB and DM dispenser applications, the bin control controller setting
must be adjusted to 2. For Coca-Cola Freestyle
®
dispenser and non-Hoshizaki
dispenser applications, the bin control controller setting must be adjusted to 3.
Increasing the ice level on any dispenser application could lead to icemaker
movement, water leakage, or ice overow.
NOTICE
• Do not block the bin control lens with top kits or the icemaker will not operate
properly.
• Failure to properly adjust the bin control setting could result in water leakage, ice
backup, and icemaker damage.
The bin control is factory set to 1 for use on Hoshizaki America standard ice storage bins.
See the table below for adjustments to ice level.
WARNING! Do not increase ice level above the settings listed below. Higher ice
levels could lead to icemaker movement, water leakage, or ice overow.
1) If not already removed, remove the front, top, and right side panels.
2) Conrm bin control controller setting for proper application. See the table below for
settings. See Fig. 18 for ice level reference. Return to step 3 in "I. Startup."
Application Bin Control Ice Level Settings
Bin Control Controller
Setting
Ice Detection Distance From
Bin Control Lens
Default: Standard Ice Storage Bins 1 254 mm (10")
Hoshizaki DB and DM Dispensers 2 305 mm (12")
Coca-Cola Freestyle
®
Dispenser and
non-Hoshizaki Dispensers
3 406 mm (16")
Optional Settings 4 508 mm (20")
5 610 mm (24")
Bin Control
Lens
Setting #1
Setting #2
Setting #3
Setting #4
Setting #5
Fig. 18
Bin Control
Controller
Factory Default for
Standard Ice Storage Bins
Recommended Setting for
Hoshizaki DB or DM Dispenser
Recommended Setting for
Coca-Cola Freestyle
®
Dispenser
and Non-Hoshizaki Dispensers
Model Shown:
KM-660MAJ-E with B-300SF
Loading ...
Loading ...
Loading ...