Hoshizaki KM660MRJ KM-660MRJ 22" KM Edge Series Slim-Line Modular Crescent Cuber with Remote Cooled, 646 lbs. Daily Ice Production, 1 Hour Cleaning Process, and H-Guard Plus, in Stainless Steel

Instruction Manual - Page 12

For KM660MRJ.

PDF File Manual, 37 pages, Read Online | Download pdf file

KM660MRJ photo
Loading ...
Loading ...
Loading ...
12
II. Installation and Operating Instructions
WARNING
The icemaker must be installed in accordance with applicable national, state, and
local codes and regulations.
• Failure to install, operate, and maintain the icemaker in accordance with this
manual will adversely affect safety, performance, component life, and warranty
coverage and may result in costly water damage.
CHOKING HAZARD: Ensure all components, fasteners, and thumbscrews
are securely in place after installation. Make sure that none have fallen into the
dispenser unit/ice storage bin.
A. Location
NOTICE
The icemaker is not intended for outdoor use. Normal operating ambient
temperature must be within 45°F to 100°F (7°C to 38°C); Normal operating
water temperature must be within 45°F to 90°F (7°C to 32°C). Operation of the
icemaker, for extended periods, outside of these normal temperature ranges may
affect icemaker performance.
The icemaker will not work at sub-freezing temperatures. To prevent damage
to the water supply line, drain the icemaker if the air temperature is going to go
below 32°F (0°C). See "IV. Preparing the Appliance for Periods of Non-Use."
The icemaker should not be located next to ovens, grills, or other high heat producing
equipment.
Allow 6" (15 cm) clearance at rear, sides, and top for proper air circulation and ease of
maintenance and/or service should they be required.
The location should provide a rm and level foundation for the equipment.
Loading ...
Loading ...
Loading ...