Loading ...
Loading ...
Loading ...
ASSEMBLY
INSTALL
A
BATTERY (See Figs. 5 and 6)
, , , ,,, ,
CAUTION: Do not short battery termi--
nals. Before installing battery, remove
metal bracelets, wristwatch bands°
rings, etc.
Positive terminal must be connected
first to prevent sparking from acciden-
tal grounding.
• Lift hood to raised position.
• Be sure battery drain tube has not come loose and is
securely attached to drain in battery tray..
• Lower battery intobattery tray with terminals to front of
tractor
• First connect RED battery cable to positive (+) battery
terminal with hex bolt, flat washer, lock washer and hex
nut as shown: Tighten securely..
• Connect BLACK gr.ounding cable to negative (-) battery
,terminal with remaining hex bolt, fiat washer, lobk.
washer and. hex nut. Tighten securely', i "
• Slide the two batter_ b61ts through the terminal guard
and start the wing nuts onto the threads_
• Position terminal guard over battery as shown, tower
battery bolts into key holes and slide square shafts of
battery bolts into slots of key holes.
• Tighten wing nuts by hand making sure battery bolts
remain in slots of the key hotes in the battery support.
• B'e sureterminaf access doers are closed.
Use terminal access doors for:
• Inspection for secure connections (to tighten hard-
ware).
• Inspection for' corrosion..
• Testing battery.
• Jumping (if required).
• Pedodic charging,.
. -"_ -;,. FLAT WASHER
s • o.," °° / (POSITIVE)
•"-. : " 2"f-_" / RED CABLE
•,, : ! t. *TI_(NEGATIVE)
LOCK WASHER
FIG. 5
"" ....... " TERMINAL
WING NUTS .......:"" """ * ,_UARD
BATTERYBOLT_. DOORSACCESS
KEYHOLE
CAPS
-BAT_ERYTRAY
FIG. 6
•. VCHECFJ.lST.
BEFORE YoU 'OPERATE A_D ENJOY" YOUF_ N#W
TRA C_OR_ WE WISH TOASSURE THAT YOU RECEIVE
THE BEST PERFORMA NCE AND SA TISFA CTtON FROM
THIS QUALITY PRODUCT
PLEASE REVIEW THE FOLLOWING CHECKLIST:
V" All assembly instructions have been completed..
,/ No remaining loose parts in carton..
•/ Batteryis properly prepared and charged. (Minimum
1 hour at 6 amps).
,/ Seat is adjusted comfortably and tightened securely
V" All tires are properly inflated. (For shipping purposes,
the tires were overinflated at the factory)°
,/ Be sure mower deck is properly leveled side4o-side/
flont-to-rear for' best cutting results. (Tires must be
properly inflated for' leveling)
,/ Check mowerand drive belts. Be sure they are routed
properly around pulleys and inside all belt keepers..
,/ Checkwiring. See that all connections are still secure
and wires are prepedy clamped..
WHILE LEARNING .HOW TO USE YOUR TRACTOR,
PA YEXTRA ATTENTION TO THE FOLLOWING IMPOR-
TANT ITEMS:
V' Engine oil is at proper level.
,/ Fuel lank is filled with fresh, clean, regular unleaded
gasoline .... _ ....
, . : _'. Become familia.f v_ith:_{..9:bhtiols. ,.their _ca.tip_ end :,:.
• "-',7'-Be _ure brak_ s_stem _s_n'.safeoperatlng c.ond_tlPn. ,
10
Loading ...
Loading ...
Loading ...