Loading ...
Loading ...
Loading ...
13
Detection Modes
The metal detector has three detection modes: All Metals,
DISC and Pinpoint.
ALL METALS – All target categories are enabled. Use this
mode to nd all metal items. This is on by default.
DISC – Stands for discrimination. Users can lter out one or
more target-IDs from the detection readings (Fig. 18).
1. Press the setting button twice to enter DISC mode. The
rst frame should start ashing.
2. Use the adjustment buttons to select the target-ID. Press
to go right, and to go left.
3. Press the DISC button, the frame will be crossed o to
show that the target-ID has been ltered out. Do the same
for any other target-ID you do not wish to detect.
4. Once you have congured your DISC mode, press the
enter button to conrm the change.
5. To re-enable a target-ID that has been ltered out, reselect
it using steps 1 & 2 then press the DISC button. The frame
will no longer be crossed o, and detection will resume for
that target-ID.
PINPOINT – Used to pinpoint the location and depth of
buried objects.
1. After locating a possible buried item, press the pinpoint
button. The pinpoint indicator will appear on screen.
2. Slowly move the search coil above the search area using
the audible tones and depth indicator to pinpoint the
location of the buried object.
3. Press the pinpoint button again to disable pinpoint mode.
Metal Detecting
1. Adjust the metal detector as needed. Set your desired
sensitivity, volume and detection mode.
2. Grasp the foam grip on the upper pole and rest your arm
on the arm rest. Use the velcro strap to secure your arm to
the detector. Hold the metal detector with the search coil
parallel with and 1
–
2 inches (2.5
–
5 cm) from the ground
(Fig. 19).
Fig. 18
Filtered
out
target-ID
DISC
button
Setting
button
x2
Select the
target-ID
(left & right)
Conrm the
change
4
3. Walk slowly. Sweep the detector side-to-side over the
ground. Keep the search coil parallel to the ground as you
sweep; do not lift the search coil at the end of each sweep
(Fig. 20).
4. Sweep the search coil in a slow arcing motion as shown
below (Fig. 21).
Fig. 19
Soft grip
Armrest
1 – 2 inch
Fig. 20
WRONG
RIGHT
Fig. 21
Loading ...
Loading ...
Loading ...