Loading ...
Loading ...
Loading ...
Control Pad Functions
Note: The appearance of your oven control may differ slightly from the one illustrated below. However, all functions are
the same. Also, push buttons or pads may be shaped differently than those appearing in this Use and Care Guide.
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, Become familiar
with the various functions of the oven as described below.
CLOCK SET COOK TIME
PAD-- Used to set PAD-- Used to
the time of day. enter the length
X'_of the baking
OVEN INTERIOR
LIGHT PAD--
Used to turn
UP and DOWN ARROW PADS--
Used along with the function pads
to select oven temperature, cool<
time, start time (when programming
an automatic start time), time of
day, clean time and minute timen
BAKE PAD--
Used to select
the bake
function.
FEATURE INDICATOR
LIGHTS-- These light to
show which feature is in use.
BROIL PAD-- Used
to select the variable
broil function.
oven interior light WARM &HOLD
ON or OFF. PAD-- Used to
SELECT CLEAN • _ • set the Warm &
PAD-- Used to _"_ I I ?°°ek _ B_ke I Brol NoJd feature.
select the Self- =- _ _ -
Cleaning cycle. A • • • o OVEN o /STOP PAD--
2, 3 or 4 hour Self- • PREHEAT __r-_ Used to clear
..... Select I Timer I Delay J _/ I/ i\ Iwarm'&l an" function
k_lean Tl?e may De Clean j_Set/Off I /Start _ DOOR LOCKED _ _STOP_ _ r_viousl
selected. _ /I _,"_o_._ P Y
// _ LoOc_ENuT entered except
TIMERSET/OFF / thetimeofday
PAD-- Used to | and minute
set or cancel the // OVEN, PREHEAT & DOOR LOCKED LIGHTS _ -- The timer. Press
minute timer. The
minute timer does
not start or stop
cooking. Also,
TIMER SET/OFF
pad is used to set
the Continuous
Bake feature.
DELAY START
PAD-- Used to set
the desired start
time for baking &
Self-Clean. May be
used with COOK
TIME to program a
delayed bake cycle.
"OVEN" light will glow each time the oven turns on to
maintain the set oven temperature. The "PREHEAT" light
wiJJ glow when the oven is first set to operate, or if the
desired temperature is reset higher than the actual oven
temperature. The "DOOR LOCKED"' light will flash when
the oven door locks and unlocks or when using the Self-
Clean cycle or when the oven door lockout is activated. The
indicator light will glow constantly after the door locks.
STOP to stop
cooking. Also
the STOP pad is
used to activate
oven door
lockout setting.
_Note: The OVEN indicator light on the electronic display will turn ON and OFF when using the Bake feature and during
preheat. This is normal and indicates that the oven is cycling to maintain the selected baking temperature. When the preheat
indicator light turns OFF, your oven has reached the set temperature.
For asitent control panel
When choosing a function, a beep will be heard each time a pad is pressed. If desired, the control can be programmed for
silent operation. Press and hold After 5 seconds, the control will beep once. This will block the controls from sounding
when a pad is pressed. To return to normal sound operation, press and hold 5ta_ again for 5 seconds until the control
beeps once.
Temperature conversion
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed
for any temperature from 170°F to 550°F (77°C to 287°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
1. Press _roii. "" appears in the display.
2. Press and hold the A until "HI" appears in the display.
3. Press and hold until °F or °C appears in the display.
4. Press the A or V to change °F to °C or °C to °F.
5. Press any control pad to return to normal operating mode.
14
Loading ...
Loading ...
Loading ...