Loading ...
Loading ...
Loading ...
!
WARNING
HEATER INSTALLATION
1.Remove warning note from front
of the heater
2.Remove 3 screws & front cover
3.Remove packaging material around
heating elements
4.Check element markings at both
ends of heater. Ensure marks on
heating element are in line with
marks on end cap.
5.Assemble front cover & 3 screws
This Heater MUST be permanently Installed and hard wired by an authorised/licenced
person. Do Not perform maintenance, carry out installation or assembly procedure while
electrical power is switched on.
REMOVE PACKAGING MATERIAL
All packaging material must be removed from heater before installation.
www.bromic.com/heating-au
6
Loading ...
Loading ...
Loading ...