Loading ...
Loading ...
Loading ...
BEFORECALLINGFORSERVICE
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
Oven emits a. Oven insulation may a. Put oven through self-clean cycle
odor. emit odor during the to speed up process of odor
first few usages. "wearing off."
b. Failure to wipe out b. Wipe excess soil off before
excess soil. using oven.
Oven door Do not force the lock Turn the control knob to the off
accidentally handle. Temperatures position. Allow the oven to cool until
locked while above the locking the temperature inside drops below
baking, temperature will the lock temperature and the handle
prevent the lock handle slides easily.
from sliding to the
unlock position.
Cleaning a. Oven was heavily a. Heavy spillovers should be
results were soiled, cleaned before the cycle is set.
poor. b. Clean cycle b. Allow the oven to clean its full
interrupted, cycle.
"F--and a You have a function If a function error code appears
number or error code. during the self-cleaning cycle, check
letter" flash the oven door latch. The latch may
in the display have been moved, even if only
slightly, from the locked position.
Make sure the latch is moved to the
right as far as it will go. Turn the oven
temperature control knob to OFF.
Allow the oven to cool for one hour.
Put the oven back into operation.
If the function code repeats,
disconnect all power to the range for
at least 30 seconds and then
reconnect power. If the function error
code repeats, call for service.
31
Loading ...
Loading ...
Loading ...