Loading ...
Loading ...
Loading ...
Basicoperations ISee page 16 for button locations. I
Selecting Listening with headphones
On the remote control:
Press one of the source selecting buttons
(DVD, FM/AM, VCR or DBS).
DVD: '1"oplay back a disc (DVD VIDEO, VCD etc.). ( "pg. 20)
FM/AM: To tune in an FM or AM station. C -_Pg. 39)
Each time you press tile button, the band altcrnates
between FM and AM.
VCR: To select the source from a component connected to the
VCR IN jacks and AUDIO IN (VCR)jacks. (-'pg. 13)
DBS: To select the source from a component connected to the
DIGITAL IN (DBS) .jack. C -" Pg. 13)
On the center unit:
Press SOURCE repeatedly until the source
name you want appears on the display
window.
NOTE
When AM, FM or DBS is selected,/his system does not output video
signals.
It may take time to change the source.
CAUTION
Always set the v(_lume tominimum level belbre starting any source.
lithe wflume is set at its high level, the sudden blast nf sound could
pennanently damage your hearing and/or blow out the speakers.
On the remote control:
Press AUDIO VOL +/-.
On the center unit:
Turn VOLUME.
CAUTION
Be sure to turn down d_e volume
Before connecting or putting on headphones as high volume may
damage both the headphones and your hearing.
Before disconnecting headphones as high volume may be suddenly
ou/put from the speakers.
While connecting a pair of headphones to the PHONES jack on the
center unit, the system automatically cancels the surround mode
(7 pg. 24) currently selected, deactivates the speakers, turns the
subwoofcr's power off, and activates the headphone mode. "H.
PHONE" appears on the display window.
Headphone mode
When using the headphones, the following signals are output
regardless of your speaker setting;
For 2 channel sources, the front left and right channel signals are
output from the headphones.
Multi-channel signals are down-mixed and output from the
headphones.
(For DVD AUDIO) When lhe disc prohibits down-mixing, only
the front left and right channels are output from the headphones.
In this case, "LR ONLY" appears on the display window for a
few seconds.
Turning off the sound
temporarily [MUTI NG]
Press MUTING.
To restore the sound
Perform one on the following:
Press MUTING again.
Press AUDIO VO/+/- (or turn VOLUME on the center unit).
Press DIMMER.
Each time you press the button, the brightness level changes.
17
Loading ...
Loading ...
Loading ...