Loading ...
Loading ...
Loading ...
Operating externalcomponentswiththe remotecontrol
5 Press number buttons (1-9, 0) to enter
the manufacturer's code (2 digits).
Examples:
For a GI Jerrold product:
Press 0, then 1.
For a Sony product:
Press 2, then 0.
5
Manufacturer Code
Echnstar 21
GI Jerrold 01.02.1)3.04. 05.06. 07.08
Hamlin 15. 16. 17, 18
Pinneer 13. 14
RCA 19
Scientific Atlanta 09. 10
Snny 20
Zenith I I. 12
6 Release 0/I VCR/DBS.
If"there is more than one code listed for your brand, try each
one until you enter the correct one.
• Operation
Aim the remote control at the DBS tuner or CATV converter.
IMPORTANT
Be_)re using the remote control to operate a
DBS tuner or CATV convcrtcr;
1 Set the remote control mode selector to
VCR/DBS.
2 PressDBS. VCR/DBS
The following buttons are available:
O/I VCR/DBS: 'lklrns DBS tuner or CNI'V converter on and
off'.
CHANNEL +/-: Changes the channels.
1-10, 0, +10 (100+): Selects the channel.
•To set the manufacturer's code
1 Slide the remote control mode selector
to VCR/DBS.
2Press VCR.
3Press and hold ©/I VCR/DBS.
Keep the button pressed until step 5 is finished.
4Press ENTER.
See page 14 for button locations. [
Press number buttons (1-9, 0) to enter
the manufacturer's code (2 digits).
Examples:
For a Phi)ips VCR:
Press 0, then 9.
For an NEC VCR:
Press 2, then 5.
Manufacturer Code Manufacturer Code
JVC OI. 02, 03 Philips 09
Emerson I I. 26 RCA 05. 06
Fisher 29 Samsung 24
Funai 10, 14, 15. 16 Sanyn 21.22. 23
Gold Star 12 Sharp 27. 28
Hitachi 04 Shintnm 30
Mitsubishi 13 Snny 18. 19.20
NEC 25 Zenith 08
Panasnnic 07. 17
6Release ©/I VCR/DBS.
If there is more than one code listed lbr your brand, try each
one until you enter the correct one.
•Operation
Aim the remote control at the VCR.
IMPORTANT
Be_)re using the remote control to operate a
VCR;
1 Set the remote control mode selector to
VCR/DBS.
2 PressVCR ,_<) ve_
VCR/OBS
The following buttons m'e available:
O/I VCR/DBS: 'lklrns VCR on and off.
I_ (play button): Starts playback.
• : Stops operation.
n: Pauses playback.
I_ : Fast fk)rwards video tape.
41-_1: Rewinds vide() tape.
REC: Press this button together with I_ (play button) to
start recording or together with II to pause
recording.
CHANNEL +/-: Changes the TV channels on the VCR.
NOTE
When operating a VCR or DBS mnerlCATV converter;
• The source setting of VCR or DBS remains after you have changed
the remote control mode selector to AUDIO or TV. When operating
VCR or DBS tuner/CATV converter again, it isnot necessary to press
VCR or DBS after setting )he remote control mode selector.
15
Loading ...
Loading ...
Loading ...