Loading ...
Loading ...
Loading ...
4 5
- Turn the Power ON and Set the Master Volume at half way.
- Press DEMO/SONG button to start the DEMO. The number of the selected DEMO will
appear on the MULTI DISPLAY. You can select the demonstration song by the [+/-] buttons.
Press the FX buttons to play the sound effects stored in the three buttons.
01- 08 Piano 81-88 Synth Lead
09-16 Chromatic Percussions 89-96 Synth Pad
17-24 Organ 97-104 Synth Eects
25-32 Guitar 105-112 Ethnic
33-40 Bass 113-120 Percussive
41-48 Strings 121-128 Sound Eects
49-56 Ensemble 129-149 Arabic Sounds
57-64 Brass 150-157 Drum Kits
65-72 Reeds 158-159 Arabic Drum Kits
73-80 Pipe 160 Eects
DEMO SONGS AND FX BUTTONS
SELECT A MAIN VOICE
MULTI PADS
Listen to the pre-programmed demonstration songs - they'll give you a good idea of what the
instrument can do.
Press the VOICE button - the voice mode is selected and the current voice number and name will
be indicated on the Message Display section.
The MULTI PADS have a factory set of 4 different sounds. These four sounds can be replaced
with other sounds available in any of the available Drum Kits (150 –159)or Arabic Drum Kits (158 –
159) or in the Effect Sound Bank (160). Press one of the Multipad to play the sounds stored in the
buttons.
To program new Drum Sounds in the Multipads:
- Select the Drum Kit or the Effect bank (150 - 160)
- Press the STORE button at the same time with the Multipad button number 1 and release
both buttons. The display shows: 1 SavePad.
Press the numeric key-pad buttons, or the [+/-] buttons to select the desired voice number
according to the Voice List.
To select a sound which number is between 1 and 99, for example 65, press the [+/-] buttons
until the number 65 is selected on the display.
To select the sound 65 using the numeric key-pad buttons follow the instructions:
- press the number 6 button and than the number 5 to select the sound.
- the sound number 65 Soprano Sax, is now selected
To select a sound which number is higher than 99, for example 129 KANOUN, press the [+/-]
buttons until the number 129 is selected on the display.
To select the sound 129 using the numeric key-pad buttons follow the instructions:
- press the number 1 button and hold it until the number 1 followed by two lines ( 1 _ _ )
appears on the display
- press than the number 2 and the number 9 buttons to select the sound.
- the sound number 129 KANOUN, is now selected.
- As soon as the two buttons are released the display shows: - - SavePad
- Press now again the Multipad number 1 button together with the key on the keyboard related
to the desired sound. The display shows: 1 SavePad.
- The new sound effect is now stored in the Multipad button.
It is possible to reprogram all the four Multipads.
SELECTING AND PLAYING THE VOICES
Your instrument has 128 sounds in the internal sound library numbered from 01 to 128, and 10
Drum Kits numbered from 150 to 159. Sound 160 is the SOUND EFFECT preset.
It is possible to play up to two sounds for the right hand (DUAL) and one sound for the left hand
(SPLIT).
The available sounds can be played in three dierent modes: Main, Dual and Split.
MAIN - plays a single voice over the entire range of the keyboard.
DUAL - mixes two dierent voices together for rich, complex sounds.
SPLIT - you can select one sound for the Left and up to two sounds to the Right part of the
keyboard.
Here nd the sounds available listed in Sound Groups. Later in the manual is available a detailed
Sound list
Loading ...
Loading ...
Loading ...