2023 RAM 2500 User Manual

Loading ...

412 SERVICING AND MAINTENANCE

4. Reach through the access hole of the wheel house

splash shield and disengage the bulb access cover by

rotating counterclockwise.

Bulb Access Cover

5. Disconnect the internal lamp wiring harness

connector from the low beam bulb.

6. Rotate the bulb counterclockwise a quarter turn to

unlock the bulb from the lamp.

7. Pull the bulb straight out from the housing.

8. Reverse the procedure for installation of new bulb

and covers.

High Beam

See the following steps to replace:

1. Open the hood.

2. Disconnect and isolate the negative battery cable.

Bulb Access Cover

3. Look under the hood and behind the headlamp to

find the high beam bulb access cover.

4. Reach behind the headlamp and disengage the

access cover by rotating counterclockwise.

5. Disconnect the internal lamp wiring harness

connector from the high beam bulb.

6. Rotate the bulb counterclockwise a quarter turn to

unlock the bulb from the lamp.

7. Pull the bulb straight out from the housing.

8. Reverse the procedure for installation of new bulb

and covers.

CAUTION!

 Do not contaminate the bulb glass by touching it with

your fingers or by allowing it to contact other oily

surfaces. Shortened bulb life will result.

 Always use the correct bulb size and type for replace-

ment. An incorrect bulb size or type may overheat

and cause damage to the lamp, the bulb socket, or

the lamp wiring.