Loading ...
Loading ...
Loading ...
192 STARTING AND OPERATING
Press this button on the touchscreen to enter
the Surround View Camera menu in the
Uconnect system.
When the vehicle is shifted into REVERSE, the Rear View
and Top View is the default view of the system.
If the camera delay is turned on, the camera image will
display for up to 10 seconds after shifting out of REVERSE.
The camera image will not display for 10 seconds if the
vehicle speed exceeds 8 mph (13 km/h), the vehicle is
shifted into PARK, or the ignition is placed in the OFF
position. The touchscreen X button disables the display of
the camera image.
If the camera delay is turned off, the camera image will
close and display the previous screen after shifting out of
REVERSE.
If active guidelines are enabled, the lines are overlaid on
the image in the Rear View to illustrate the width of the
vehicle. The view will also include the side view mirrors
and its projected back up path based on the steering
wheel position.
There are different colored zones to indicate the distance
to the rear of the vehicle. Refer to the following chart:
Modes Of Operation
Standard Rear View can be manually activated by
selecting “Back Up Camera” through the Controls menu
within the Uconnect system.
Top View
The Top View will show in the Uconnect system with Rear
View and Front View in a split screen display. There are
integrated ParkSense arcs in the image at the front and
rear of the vehicle. The arcs will change color from yellow
to red corresponding the distance zones to the oncoming
object.
The fifth button of the ParkSense Camera View screen will
change based on vehicle options. If not equipped with a
Cargo Camera or Trailer Reverse Guidance, the Back Up
Camera button will be displayed. If equipped with a Cargo
Camera but no Trailer Reverse Guidance, the Cargo
Camera button will be displayed. If equipped with both a
Cargo Camera and Trailer Reverse Guidance, the Cargo/
Trailer Reverse Guidance button will be displayed.
ParkSense Camera View
NOTE:
Front tires will display on the image when the tires are
turned.
Due to wide angle cameras in mirrors, the image will
appear distorted.
Top View will show which doors are open.
Open front doors will cancel the outside image.
Top View Plus Rear View
This is the default view of the system in
REVERSE and is always paired with the
Top View of the vehicle with optional active
guidelines for the projected path when
enabled.
Rear Cross Path View
The Rear Cross Path will give the driver a wider
angle view of the Back Up Camera system. The
Top View will be disabled when this is selected.
Top View Plus Front View
The Front View will show what is immediately in
front of the vehicle and is always paired with
the Top View of the vehicle.
Front Cross Path View
The Front Cross Path will give the driver a wider
angle view of the front camera system. The Top
View will be disabled when this is selected.
Zone
Distance To The Rear Of
The Vehicle
Red 0 - 1 ft (0 - 30 cm)
Yellow 1 ft - 6.5 ft (30 cm - 2 m)
Green
6.5 ft or greater
(2 m or greater)
23_DJD2_OM_EN_USC_t.book Page 192
Loading ...
Loading ...
Loading ...