Loading ...
Loading ...
Loading ...
STARTING AND OPERATING 195
Forward Facing Camera With Tire Lines — If Equipped
The Forward Facing Camera displays a front view image of
the road ahead, along with tire lines to guide the driver
when driving on narrow roads. Tire lines can be activated/
deactivated through the Uconnect Settings.
Activation
The Forward Facing Camera can be activated in the
following ways:
Pressing the Forward Facing Camera button in the
Controls screen or Apps menu
Pressing the Forward Facing Camera button located in
the upper left corner of the Back Up camera display
Once activated, the camera image will remain on as long
as the vehicle speed is below 8 mph (13 km/h).
Deactivation
The Forward Facing Camera is deactivated in the following
conditions:
The vehicle exceeds 8 mph (13 km/h), except when
vehicle is in 4WD Low.
The touchscreen X button on the display is pressed.
The vehicle is shifted into PARK.
The ignition is placed in the OFF position.
NOTE:
If the vehicle is in 4WD Low, the Forward Facing Camera
image will be displayed until the touchscreen X button is
pressed or the ignition is placed in the OFF position.
Trailer Reverse Guidance — If Equipped
The Trailer Reverse Guidance feature assists the driver in
backing up a trailer by providing adjustable camera views
of the trailer and surrounding area. The cameras are
mounted on the side mirrors and the images will be
displayed side-by-side on the touchscreen. Left and
right camera images are swapped and mirrored on the
touchscreen to show the equivalent area behind the
vehicle as though the driver is using the side mirrors.
Activation
The Trailer Reverse Guidance feature can be activated by
pressing the Trailer Reverse Guidance button on the Back
Up/Cargo Camera Display.
Deactivation
When the vehicle is shifted out of REVERSE with camera
delay turned on, the camera image will continue to be
displayed for up to 10 seconds unless the vehicle speed
exceeds 8 mph (13 km/h), the vehicle is shifted into
PARK, or the ignition is placed in the OFF position. There is
a touchscreen X button to disable the display of the
camera image.
If Trailer Reverse Guidance is selected through manually
activated Surround View, Back Up Camera, or Cargo
Camera, the following deactivation conditions apply:
The touchscreen X button on the display is pressed
The vehicle is shifted into PARK
The ignition is placed in the OFF position
The vehicle speed is over 8 mph (13 km/h) for
10 seconds
Blind Spot Assist Cameras — If Equipped
There are cameras located in the exterior mirrors to assist
in blind spot detection by providing a wide camera view of
the selected side of the vehicle. The blind spot cameras
will work in the ON/RUN or ignition ON position. Press the
touchscreen X button or the More Cams button to exit the
screen. The Blind Spot Assist Cameras can also be
activated with Turn Signal engagement, see
Ú page 189
for more information.
Activation
Press the Driver Blind Spot or Passenger Blind Spot
buttons by locating the Vehicle screen, then Cameras
screen.
Driver Blind Spot
Pressing the Driver’s Blind Spot button will provide a full
screen view of the driver’s outside mirror camera.
Passenger Blind Spot
Pressing the Passenger’s Blind Spot button will provide a
full screen view of the passenger’s outside mirror camera.
WARNING!
Drivers must be careful when backing up even when
using the Surround View Camera. Always check
carefully behind your vehicle, and be sure to check for
pedestrians, animals, other vehicles, obstructions, or
blind spots before backing up. You are responsible for
the safety of your surroundings and must continue to
pay attention while backing up. Failure to do so can
result in serious injury or death.
4
23_DJD2_OM_EN_USC_t.book Page 195
Loading ...
Loading ...
Loading ...