Loading ...
Loading ...
Loading ...
5
Standard Installation
Note:
1. Test to make sure that the entire installation works properly before pulling cables through
ceilings/walls.
2. 24AWG, Solid Wire Cat5e/6 cable, such as Tripp Lite’s N202-Series, is required to achieve
maximum distance and resolution.
B140-202
B140-1P0
B140-1A0
DVI OVER Cat5
EXTENDER
REMOTE UNIT
MODEL: B140-1P0
Up to 150 ft. at 1920 x 1080 @ 60Hz
Up to 200 ft. at 1024 x 768 @ 60Hz
Up to 50 ft. at 1920 x 1080 @ 60Hz
Up to 100 ft. at 1024 x 768 @ 60Hz
1
Make sure the DVI sources are turned off.
2
Connect the first DVI source to the port on the B140-202 marked
Source 1.
3
Connect the second DVI source to the port marked Source 2.
4
Connect the external power supply to the B140-202 and plug it
into a Tripp Lite Surge Suppressor, Power Distribution Unit (PDU),
or Uninterruptible Power Supply (UPS). When receiving power, the
following LEDs will illuminate: The Green Power LED, The Orange
Source LEDs for Output 1 and Output 2, and the Green RJ45 LEDs.
5
Using Cat5e/6 cable, connect the RJ45 port marked Output 1 to a
B140-Series remote receiver unit.
6
Repeat step 5 to connect a second monitor to the RJ45 port marked
Output 2.
12-09-067-93323B.indd 5 11/9/2012 4:50:30 PM
Loading ...
Loading ...
Loading ...