Loading ...
Loading ...
Loading ...
11
Troubleshooting
7
Do you have any patch panels or other devices in between the
transmitter, repeater, and receiver units? Tripp Lite’s DVI over Cat5
extender products were designed to be connected directly from the
transmitter to the repeater and/or receiver via UTP cable. The more
connection points that are in between the source and the remote
monitor, the more likely it will be that signal degradation will occur,
causing poor performance. If you have a patch panel or other device in
between, it should be removed from the installation.
8
Check your cabling for any damages that may have occurred during
installation. If a cable connector is loosened from pulling through
ceilings/walls, or the cable jacket is damaged causing the wiring to be
exposed, you will not be able to achieve maximum performance.
9
Are the transmitter, repeater, and/or receiver located in an area that
exposes them to higher temperatures? If the product is overheated, it
will not function properly.
10
Are you using a VGA to DVI adapter with this product? The B140-Series
extenders support DVI-D (Digital) only, and will not function if connected
to a VGA computer or monitor.
11
If using a DVI to HDMI adapter with this product, you will only be able
to transmit a video signal. DVI does not support audio, and will not be
able to send an audio signal to an HDMI display.
12-09-067-93323B.indd 11 11/9/2012 4:50:32 PM
Loading ...