Tripp Lite BP240V65L-NIB Owner's Manual

Loading ...

5. Installation

Figure 5-25A: Front view

5.5.2 Battery Installation and Connection

The 40 batteries can be divided into two groups connected in parallel for use. Each group has 20 batteries in series

(BAT+, N and BAT-). Place the batteries in the cabinet from the bottom to top one-by-one, then connect the battery

cables according to the diagrams that follow.

Note: The positive and negative polarity of the battery cannot be reversed or short circuited. Doing so will damage the battery and/

or cause injury. Do not touch the battery’s positive and negative terminals at the same time. Before replacing or removing the batteries,

disconnect the breaker, pull up cell terminals and remove the screws of the copper bus bar. Not following the instructions could result in

damagetotheequipmentorpersonalinjury.Theinstallationmustconsistof40batteries.

Layer 3

Layer 4

Layer 2

Layer 1

Battery Group

Battery Group 1

Loading ...

Tripp Lite BP240V65L-NIB series ±120VDC External Battery Cabinet