Tripp Lite BP240V65L-NIB Owner's Manual

Loading ...

5. Installation

5.4.1 Remove the Chassis Shell

Place the battery cabinet in position. Remove the top, front, left and right panels. Remove the right and left cover plate of

the battery pack and the battery apper to install the batteries.

5.4.2 Battery Installation and Connection

Each battery group has 20 pieces of batteries in series (BAT+, N and BAT-). Place the batteries in the cabinet from the

bottom to top one-by-one, then connect the battery cables according to the diagrams that follow.

Note: The positive and negative polarity of the battery cannot be reversed or short circuited. Doing so will damage the battery and/

or cause injury. Do not touch the battery’s positive and negative terminals at the same time. Before replacing or removing the batteries,

disconnect the breaker, pull up cell terminals and remove the screws of the copper bus bar. Not following the instructions could result in

damagetotheequipmentorpersonalinjury.Theinstallationmustconsistof40batteries.

Figure 5-2: Exploded Chassis View, Models BP240V65, BP240V65-NIB, BP240V100, BP240V100-NIB

Loading ...

Tripp Lite BP240V65L-NIB series ±120VDC External Battery Cabinet