Loading ...
Loading ...
Loading ...
Troubleshooting
114
27
The wireless security information (Authentication
method, Encryption method, Network Key) is
incorrect.
The wireless security information (authentication method/encryption method/
network key (password)) is incorrect.
Refer to the table for the [The authentication and encryption methods used by
the selected wireless LAN access point/router are not supported by your
machine.] error message, and reconfirm the wireless security information
(authentication method/encryption method/network key (password)). (page
18)
Refer to “How can I find the wireless security information (SSID and network
key)” on page 115.
28
The wireless setting is not activated. The wireless network setting is not activated.
Activate the wireless network. (page 18)
29
This pattern cannot be loaded as the pattern extends
out of the editable area.
This message is displayed when the sample stitch pattern that you try to add
with the MY CUSTOM STITCH function extends out of the stitching area.
Select a different stitch pattern, or delete the existing stitch pattern (point).
30
This pattern cannot be used. This message appears when you try to retrieve a pattern that cannot be used
with this machine.
31 This USB media cannot be used. This message is displayed when you try to use incompatible media.
32
Turn off the power and replace the needle
plate.
This message is displayed when you try to sew with a stitch other than a
straight stitch (middle needle position) while the straight stitch needle plate is
installed.
33
USB media is not loaded. Load USB media. This message is displayed when you try to recall or save a pattern while no
USB flash drive is loaded.
34
When the speed controller is set to control the zigzag
stitch width, the "Start/Stop" button does not
operate.
This message is displayed when the speed control lever is set to control the
zigzag stitch width, and the “Start/Stop” button is pressed. Set [Width
Control] to [OFF] in the settings screen (page 15), or use the foot controller to
operate the machine.
35
F**
If error message [F**] appears in the LCD while the machine is being used, the
machine may be malfunctioning. Contact your authorized Brother dealer or
the nearest Brother authorized service center.
Error messages Cause/solution
Loading ...
Loading ...
Loading ...