Loading ...
Loading ...
Loading ...
Locate the wall thermostat, handheld
remote controller, batteries, thermostat
support bracket, and extension cable.
ese items are typically found within
the hidden compartment on top of the
system itself during rst installation.
Using two wood screws to x the
bracket of the thermostat to the wall,
connect the extension cable to the wall
thermostat and place the thermostat
onto the support bracket.
A 3/4” size hole must be drilled in
order to pass the cables through. e
wall thermostat cable will pass through
this hole from behind.
To locate where to make the hole, rst
nd the needed X value by placing the
3”-3/8 square wall thermostat
against the wall. e length from the
side edge of the thermostat to the side
edge of the wall is X. e same applies
for nding Y on the vertical axis.
e center of the hole will be X+1”-3/4
inward from the side, and Y+1”-1/8
inward from the top.
19
INSTALLATION INSTRUCTIONS
Placement of the Wall ermostat
Cable
Outlet Slot
3” - 3/8
3/4”
X + 1” - 3/4
Y + 1” - 1/8
Loading ...
Loading ...
Loading ...