Loading ...
Loading ...
Loading ...
WARNING FOR BATTERY
• The product must be powered off
before removing the battery.
• Do not disassemble the battery by
yourself.
• If you need to replace it, please
contact the after-sales service center.
• Please dispose of used battery
according to local laws and
regulations.
• Do not dismantle, open or shred the
battery.
• Do not expose batteries to heat or
fire. Avoid storing or keeping robot in
direct sunlight.
• Do not short-circuit a battery.
• Do not store batteries haphazardly
in a box or drawer where they may
short-circuit each other or be
short-circuited by other metal
objects.
• Do not subject batteries to
mechanical shock.
• In the event of a leaking, do not
allow the liquid to come in contact
with the skin or eyes. If contact has
been made, wash the affected area
with copious amounts of water and
seek medical advice.
• Do not use any charger other than that
specifically provided for use with the
equipment.
• Do not use any battery which is not
designed for use with the equipment.
• Do not mix different manufacture,
capacity, size or type within a device.
Keep batteries out of the reach of
children.
• Seek medical advice immediately if the
battery has been swallowed.
• Keep batteries clean and dry.
• Do not leave a battery on prolonged
charge when not in use.
• After extended periods of storage, it
may be necessary to charge and
discharge the batteries several times to
obtain maximum performance.
• The batteries give their best
performance when they are operated at
normal room temperature (59 °F - 77
°F).
• Retain the original product literature
for future reference.
• The battery may be irreversibly
damaged if the battery is in low power
for a long time. It is recommended that
the battery retain sufficient power
before storage.
[symbol IEC 60417-5957
( 2004-12 )]
[symbol ISO 7000-0790
( 2004-01 )]
[symbol IEC 60417-5031
( 2002-10 )]
[symbol IEC 60417-5032
( 2002-10 )]
[symbol IEC 60417-5172
( 2003-02 )]
time-lag miniature fuse-link where X is the symbol for
the time/current characteristic as given in IEC 60127
for indoor use only
read operator's manual
direct current
alternating current
class II equipment
SAVE THESE INSTRUCTIONS
Household use only
IMPORTANT SAFEGUARDS
www.eureka.com 5
Loading ...
Loading ...
Loading ...