Loading ...
Loading ...
Loading ...
3
3-29
To fasten your seat belt:
Pull the seat belt out of the retractor and
insert the metal tab into the buckle. There
will be an audible “click” when the tab
locks into the buckle. When not securing
a child restraint, the seat belt operates in
the same way as the driver’s seat belt
(Emergency Locking Retractor Type). It
automatically adjusts to the proper length
only after the lap belt portion of the seat
belt is adjusted manually so that it fits
snugly across your hips.
When the seat belt is fully extended from
the retractor to allow the installation of a
child restraint system, the seat belt
operation changes to allow the belt to
retract, but not to extend (Automatic
Locking Retractor Type). Refer to the
“Using a Child Restraint System” section
in this chapter.
OHI038142
To release your seat belt:
Press the release button (1) in the locking
buckle.
When it is released, the belt should
automatically draw back into the
retractor. If this does not happen, check
the belt to be sure it is not twisted, then
try again.
NOTICE
Although the seat belt retractor provides
the same level of protection for seated
passengers in either emergency or
automatic locking modes, the emergency
locking mode allows seated passengers
to move freely in their seat while keeping
some tension on the belt. During a
collision or sudden stop, the retractor
automatically locks the belt to help
restrain your body.
To deactivate the automatic locking
mode, unbuckle the seat belt and allow
the belt to fully retract.
Second row center seatbelt (3-point
rear center seat belt)
OJK030020
1. Take out the buckle (2), which is stored
between the seat/seatback cushions.
2. Insert the metal plate (1) into the buckle
(2), until it clicks.
You can make sure its secure fastening
by pulling the seatbelt webbing. The
buckle with 'CENTER' mark should be
used for the 3-point seatbelt.
3. Restore the buckle between the
seat/seatback cushion after
unfastening the seatbelt.
JK1_en_US.book Page 29
Loading ...
Loading ...
Loading ...