Loading ...
Loading ...
Loading ...
7
7-171
- The brake pedal or accelerator pedal
is depressed when all the doors are
closed
- The smart key is outside the vehicle
when the brake pedal is depressed
while the driver's door is open.
- Rapid acceleration occurs
- Vehicle skid occurs
- The wheel is stuck by an obstacle and
cannot move
- There are pedestrians, animals or
objects at the front and rear of the
vehicle at the same time
- Approximately 3 minutes and 50
seconds has passed after Remote
Smart Parking function has started to
operate
- The slope of the road exceeds the
operational range
- The function is paused for more than
1 minute
- The steering wheel, gearshift,
braking, and drive controls are not
working properly
- There is a problem with the smart key
or the smart key battery is low
- ABS, TCS or ESC system operates due
to slippery road conditions
- The alarm of the Theft Alarm System
sounds
When Remote Smart Parking function
is canceled, the vehicle will
automatically stop, shift the gear to P
(Park) and engage EPB (Electronic
Parking Brake).
Smart Exit
Operating order
Smart Exit function operates in the
following order:
1. Getting ready for exit
2. Checking space
3. Select exit direction
4. Smart Exit
1. Getting ready for exit
OJK070163L
(1) With the engine turned on, depress the
brake pedal and shift the gear to P (Park)
or N (Neutral).
(2) Press and hold the Parking/View ( )
button to turn on Remote Smart Parking
Assist.
• 'Agree' must be selected on the
infotainment system screen and the
infotainment system has to operate
properly to use Smart Smart Exit
function.
• Drive below 3 mph (5 km/h) with the
engine on and shift the gear to N
(Neutral), Smart Exit function can be
used.
• If the function is turned on again after
parallel parking is completed by
Remote Smart Parking Assist, Smart
Exit function can be used.
JK1_en_US.book Page 171
Loading ...
Loading ...
Loading ...