Loading ...
Loading ...
Loading ...
3
3-25
• Do not use the seat belt if it is twisted. A
twisted seat belt will not protect you
properly in an accident.
• Do not use a seat belt if the webbing or
hardware is damaged.
• Do not latch the seat belt into the
buckles of other seats.
• NEVER unfasten the seat belt while
driving. This may cause loss of vehicle
control resulting in an accident.
• Make sure there is nothing in the buckle
interfering with the seat belt latch
mechanism, because any materials in
the buckle can cause the seat belt not
to be fastened securely.
• No modifications or additions should
be made by the user which will either
prohibit the seat belt adjusting devices
from operating to remove slack, or
prohibit the seat belt assembly from
being adjusted to remove slack.
WARNING
Damaged seat belts and seat belt
assemblies will not operate properly.
Always replace:
• Frayed, contaminated, or damaged
webbing.
• Damaged hardware.
• The entire seat belt assembly after it
has been worn in an accident, even if
damage to webbing or assembly is not
apparent.
Seat Belt Warning Light
Driver’s seat belt warning
Instrument cluster
OJK030016L
As a reminder to the driver, the seat belt
warning light will illuminate for
approximately 6 seconds each time the
Engine Start/Stop button is in the ON
position regardless of belt fastening.
If the seat belt is not fastened, when
vehicle speed is between 5.5 mph (9
km/h) and 12 mph (20 km/h) the warning
light will continue to illuminate and
warning chime will sound until the seat
belt is fastened.
If the seat belt is not fastened, when
vehicle speed is above 12 mph (20 km/h),
the warning light will blink and warning
chime will sound for approximately 100
seconds (warning chime will sound in
three stages).
JK1_en_US.book Page 25
Loading ...
Loading ...
Loading ...