Broan B98DHV Installation & Operation Instructions

Loading ...

800.558.1711 Installation & Operation Instructions

The Dehumidier generates condensate.

Place a secondary drain pan with a oat switch under the dehumidier if it is suspended above a nished

area or above an area where water leakage could cause damage.

A drain trap is required for the dehumidier to drain properly. Install a 3/4" threaded male NPT adapter to

the drain pan. Install a drain pipe assembly utilizing 3/4" PVC pipe to transport the condensate to a drain.

Pitch of drain should be 1" per 10'.

An optional condensate pump kit is available for use with the Dehumidier and may be installed if lift is

required to dispose of condensate. Condensate is automatically pumped to a remote location when the

water level in the pump’s reservoir rises to close the oat switch.

The pump also contains a safety oat switch. The white leads from this switch extend from beneath the

pump cover. This switch should be installed in series with the eld wire that connects to the common lead

from the Dehumidier to the control panel. If the pump fails, this switch opens the common control circuit

and stops water production before the reservoir overows. Contact a qualied electrician to install the safety

oat switch to the Dehumidier.

Note: An optional condensate pump kit can be purchased through your dealer or online.

DRAIN INSTALLATION

Drain Installation

Drain

Trap

Secondary

Drain Pan

Drain

Port

Drain Trap

Secondary Drain Pan

Drain Port

Drain

Trap

Secondary

Drain Pan

Drain

Port

Drain Trap

Secondary Drain Pan

Drain Port

Side View

Loading ...

Broan B98DHV 98 Pint Dehumidifier