Loading ...
Loading ...
Loading ...
ft. With a guide wire installed through the passage,
the recommended minimum distance between the
boundary wires is 60 cm / 24 in.
• If the work area has areas which are connected by
a narrow passage (B), you can set the product to
first follow and then leave the guide wire after a
certain distance (C). The settings can be changed
in
GPS assisted navigation on page 22
.
• Use the GPS Assisted Navigation that helps the
product select the most optimal operation. Refer to
Lawn coverage on page 22
.
• If the work area includes a secondary area (D),
refer to
To make a secondary area on page 15
.
Put the product in the secondary area and select
Secondary area mode
.
B
D
C
A
3.5 Installation of the product
3.5.1 Installation tools
• Hammer/plastic mallet: To simplify putting the
stakes into the ground.
• Edge cutter/straight spade: To bury the boundary
wire.
• Combination pliers: For cutting the boundary wire
and pressing the connectors together.
• Adjustable plier: For pressing the couplers
together.
3.5.2 To install the product
Do the general steps that follow to install the product:
1. Install the Automower
®
Connect app on your
mobile device. Refer to
Automower
®
Connect app
on page 16
.
2. Do a pairing operation of the product and the
Automower
®
Connect app. Do the basic settings in
the start up sequence in the Automower
®
Connect
app. Refer to
To install the Automower
®
Connect
app on page 17
.
3. Install the charging station. Refer to
To install the
charging station on page 17
.
4. Install the boundary wire. Refer to
To install the
boundary wire on page 18
.
5. Install the guide wire. Refer to
To install the guide
wire on page 18
.
6. Make sure that the charging station is installed
correctly. Refer to
To do a visual check of the
charging station on page 19
.
3.5.3 Automower
®
Connect app
The product can connect to mobile devices that have
the Automower
®
Connect app installed. Automower
®
Connect is a free app for your mobile device. You
can use the extended functions for the product in the
Automower
®
Connect app.
• The
Dashboard
shows the current operation of the
product. You can select an operating mode for the
product in the dashboard.
• The
Map
shows the current position of the product
and the set center point for the GeoFence function.
• In the
Settings
menu you can set the settings for
the product.
• In the
Statistics
menu you can see the statistics of
the product.
• In the
Messages
menu you can find the
Fault
messages
and the
Information messages
of the
product.
• In the
Support
menu you can find the full operator's
manual for the product and the
Help Center
where
you can get help with troubleshooting.
16
- Installation 2071 - 001 - 29.03.2023
Loading ...
Loading ...
Loading ...