Loading ...
Loading ...
Loading ...
14
Error Code
If an abnormality arises, the cooktop will enter the protective state automatically and
display corresponding protective codes:
Error Codes
Problem
Possible causes
What to do
E0 & repeated
beep sound
warning.
Overheating protection: the
cooktop is over heated.
Stop cooking till the internal temperature back to
normal. Please contact after sales service to
check the cooktop if there is PCB failure.
E1
Open circuit failure of
thermocouple
Please contact after sales service.
The above are the judgment and inspection of common failures.
AFTER SALES SERVICE 1 300 307 917
ATTENTION! To avoid danger, please do not disassemble the unit by yourself!
Installation
Selection of installation equipment
• Be sure the thickness of the kitchen bench is at least 30mm. The bench must be a
heat-resistant material that can withstand the heat radiation from the cooktop.
• A minimum of 50mm bench space must be preserved around the hole to allow
installation.
Cut out the work surface according to the sizes shown in the drawing. Be accurate.
Model L(mm) W(mm) H(mm) D(mm) A(mm) B(mm) X(mm)
EMCER64E 590 520 62 58 560 490 50 min.
Loading ...
Loading ...
Loading ...