Loading ...
Loading ...
Loading ...
11
Using the Timer
You can use the timer in two different ways:
1. You can use it as a minute minder. In this case, the timer does not turn any cooking
zone off when the set time is up.
2. You can use it as a cut off timer to turn one or more cooking zones off when the set
time is up.
You can set the timer up to 99 minutes.
Using the Timer as a Minute Minder
Make sure the cooktop is turned on, and that no cooking zones are in selecting mode.
Note: you can use the minute minder before or after a cooking zone setting is finished.
1. Touch timer key (6), “10” will show in the timer display. and single digit “0” flashes.
2. Set the desired minutes by touching the MINUS key (2) or PLUS key (3).
3. Touch timer key again, then number to represent tens digit will flash.
4. Set the desired dozens of minutes by touching MINUS key (2) or PLUS key (3).
5. When the time is set, it will begin to count down immediately. The display will show
the remaining time.
6. A signal sound will beep for 10 seconds and the timer indicator shows “ ” when
the setting time finished.
Setting the timer to turn one or more cooking zones off
If the timer is set on one zone:
1. Selecting the heating zone key (4) that you want to set timer.
2. Touch timer key (6), the digits “10” will show in the timer display and the “0” flashes.
3. Set the desired time in the control panel.
4. When the time is set, it will begin to count down immediately. The display will show
the remaining time.
NOTE: The red dot next to power level indicator (eg. ) will illuminate indicating that the
zone is in timer mode.
5. When the cooking time expires, the corresponding cooking zone will switch off
automatically.
NOTE: Other cooking zones will keep operating if they were turned on previously.
Loading ...
Loading ...
Loading ...