Loading ...
Loading ...
Loading ...
20
Flame Adjustment
INSTALLATION
STEP 3: FLAME ADJUSTMENT
1. Light one burner at a time and set it to the MINIMUM position (small flame).
2. Remove the knob by firmly and carefully pulling it straight out.
3. The range is equipped with a safety valve. Using the small flat-head screwdriver
provided with this manual, locate the adjustment screw (see diagram below), hold the
metal stem with one hand and turn the screwdriver to the right or left until the burner
flame is adjusted to desired minimum.
4. Make sure that the flame does not go out when switching quickly from the MAXIMUM
to the MINIMUM position.
The high flame setting cannot be adjusted to be lower. If the height is too high, revisit the
conversion set-up. A step may have been missed.
Reference the diagrams
below if your range was
manufactured after May
2021. To check, reference
the rating label under the
front edge of the range.
Scan the QR code to follow
along with a video.
Reference the diagrams
below if your range was
manufactured before May
2021. To check, reference
the rating label under the
front edge of the range.
Scan the QR code to follow
along with a video.
2.0 x 50 mm
2.0 x 50 mm
2.0 x 50 mm
2.0 x 50 mm
Loading ...
Loading ...
Loading ...