Loading ...
Loading ...
Loading ...
6
Installing the Legs
INSTALLATION
The ranges must be used with the legs properly installed. Height-adjustable legs are
shipped with the range in a foam container above the range. Legs are 4” tall and can be
adjusted up to 2 1/2” for a maximum height of 6 1/2”.
Installing the Legs
4”
Before installing the legs, position the appliance near its final location, as the legs are not
suitable for moving the appliance over long distances.
1. After unpacking the range, raise it enough to insert the legs in the appropriate
receptacles situated on the lower part of the appliance. Lower the range gently to keep
any undue strain from legs and mounting hardware.
2. Adjust leg height to the desired level by twisting the inside portion of the leg assembly
until the proper height is reached. Check with a level that the range is perfectly level.
INSTALLING THE SQUARE COVERS
Some ranges come with attachable square leg covers. To install, loosen the round leg from
the range to accommodate for the square leg. Align the top of the square leg (with the slit) to
the top of the round legs and slide in. Adjust the square leg and the round leg until they are
flush with the ground.
NOTE: If the range is not level, the cooking will be uneven. When adjusting the legs,
ensure they are the same height.
Loading ...
Loading ...
Loading ...