Loading ...
Loading ...
Loading ...
11
Gas Connection
GAS CONNECTION
• All gas connections must comply with national and local codes. The gas supply line
(service) must be the same size or greater than the inlet line of the appliance. This range
uses a 1/2˝ NPT inlet. Use appropriate sealant on all pipe joints that are resistant to
gas.
• This range can be used with natural or liquid propane gas. The range is shipped from
the factory for use with natural gas.
• For liquid propane gas household installation, the appliance must be converted by a
factory-trained professional, or qualified licensed plumber or gas service company.
• Gas conversion is important for safe and effective use of the appliance. It is the
responsibility of the owner of the range to perform the appropriate gas conversion
following the directions of the manufacturer.
• The gas conversion procedure is described in this manual and in the package
containing the conversion orifices shipped with every range.
• Please provide the service person with this manual before work is started on the range
top.
DO NOT use an open flame when checking for leaks.
WARNING
Leak testing of the appliance shall be conducted according to the manufacturer’s
instructions. Always check for leaks with a soapy water solution or other acceptable
method. Check for gas leakage on all gas connections between inlet gas pipes of the
appliance, the gas regulator, and the manual shut-off valve. Bubbles will form with a soapy
water solution if there is a leak.
INSTALLATION
Loading ...
Loading ...
Loading ...