Loading ...
Loading ...
Loading ...
Flush the water system
Prior to initial use
21
Prior to initial use and after a longer period of disuse of the
espresso machine, allow the contents of approx. 2-3 cups of
water to run through the machine. This will clean the water circuit
and all parts will be heated up.
During initial use, it may occur that the pump makes slightly louder
noises. That is normal. After a short time, the system has filled with
water and the noise will become quieter.
The lid of the water tank can be folded forward and backwards
and can also be used for holding the tank when inserted.
1. Ensure that the steam controller is switched to OFF and
disconnect the power plug, if necessary.
2. Fill fresh, cold and still water into the tank. Pay attention to the MIN
and MAX filling marks:
3. Insert the water tank by first holding it flush against the back of
the espresso machine and then let it slide downwards, until the
contour is flush with the machine. Flip the lid down.
4. Insert the drip tray with the draining rack .
5. Install the unfilled filter holder . For this, align it to the left with
the handle at the front, then move it horizontally upwards into the
filter holder bracket and turn it to the right as far as it will go.
6. Align the steam jet/hot water jet with the opening in the
draining rack .
7. Connect the power plug to a socket. A beep tone sounds.
Loading ...
Loading ...
Loading ...