Midea MLE47R5BWW User Manual

Loading ...

Dryer

Safety

Operation

Requirements

Parts and

Features

Installation

Instructions

Dryer Care

Troubleshooting AppendixDryer Use

FOUR WIRE OUTLET

4-Wire

receptacle

(14-30R)

If your outlet is a four-wire outlet, choose a 4-wire

power supply cord with ring or spade terminals and

UL listed strain relief. The 4-wire power supply cord

must:

• Be at least 4 ft. (1.22 m) long.

• Have four 10-gauge solid copper wires.

• Match a four-wire receptacle of NEMA Type 14-

30R. The ground wire (ground conductor) may be

either green or bare. The neutral conductor must be

identiﬁed by a white color.

4-Wire system connections

Remove the center terminal block screw.

2. Connect the ground wire (green or unwrapped) of the power cord to the

external ground conductor screw.

3. Connect the neutral wire (white or center wire) of the power cord and the

appliance ground wire (white) under the center screw of the terminal block.

Be sure to cross the screw through the ring of the power cord terminal and

tighten the screw.

4. Connect the other wires to the outer terminal block screws. Be sure to cross

the screw through the terminal ring and tighten the screw.

5. Tighten the strain relief screws.

6. Insert the tab of the terminal block cover into your dryer’s rear panel slot.

Secure the cover with a screw.

4-wire system instructions:

IMPORTANT: Ring-type terminals are recommended. If using strap

terminals, make sure they are tightened.

Ⓐ Center terminal block screw

Ⓑ External ground connector

power cord

Ⓓ Neutral grounding wire (White)

Ⓔ Neutral wire (white or center wire)

Ⓕ 3/4" (1.9cm) UL-listed strain relief