Loading ...
Loading ...
Loading ...
SIGLENT Remote Manual
65 SDM3055/SDM3055A
2.9.12 [SENSe:]{FREQuency|PERiod}:VOLTage:RANGe:AUTO
{OFF|ON|ONCE}
[SENSe:]{FREQuency|PERiod}:VOLTage:RANGe:AUTO?
Disables or enables voltage autoranging for frequency and period measurements.
Note:This parameter is shared between frequency and period measurements.
Parameter Typical Return
{ON|1|OFF|0},default ON 0 (OFF) or 1 (ON)
Configure frequency measurements and perform an immediate AC voltage
autorange. Make and read two measurements:
CONF:FREQ
FREQ:VOLT:RANG:AUTO ONCE
SAMP:COUN 2
READ?
With autoranging enabled, the instrument selects the range based on the input signal.
Selecting a fixed range ([SENSe:]<function>:RANGe) disables autoranging.
This parameter is set to its default value after a Factory Reset (*RST) or Instrument
Preset (SYSTem:PRESet).
Loading ...
Loading ...
Loading ...