Delonghi ECAM220.31.SB Magnifica Start

Instructions for Use - Page 8

For ECAM220.31.SB. Also, The document are for others Delonghi models: ECAM22X.2Y, ECAM22X.3Y

PDF File Manual, 24 pages, Read Online | Download pdf file

ECAM220.31.SB photo
Loading ...
Loading ...
Loading ...
8
It is not possible to make a Doppio+ coee using
pre-ground coee.
7.4 General indications for making coee-
based drinks
Indicator lights may appear on the control panel (B) dur-
ing use. Their meaning is given in section “16. Explanation
of lights”.
For hotter coee, see section “7.7 Tips for a hotter coee.
If the coee is delivered a drop at a time, too weak and
not creamy enough or too cold, read the tips in section
“17. Troubleshooting”.
To customise the drinks according to personal taste, see
sections “7.5 Varying the coee intensity” and “7.9 Cus-
tomising the quantity in the cup”.
Please note:
In energy saving mode, a few seconds may elapse before the
rst coee is delivered as the appliance must heat up again.
7.5 Varying the coee intensity
1. Press the button (B5) repeatedly until the Leds
relative to the desired intensity light up (B6):
Mild
Medium
Strong
2. Select the desired coee drink.
Please note:
When the next coee is made, the machine will show the
last intensity setting selected.
In the event of power failure, the machine will revert to
the medium default setting.
7.6 Rinsing
Use this function to deliver hot water from the coee spouts to
clean and heat the appliances internal circuit.
1. Place a container of at least 100ml capacity under the cof-
fee spouts (A15) (g. 6).
2. To perform the rinse cycle, simply press the button
(B2) and hold for about 5 seconds. The cycle will star and
stop automatically (to terminate the cycle sooner, press
the same button a second time).
Please note:
If the appliance is not used for more than 3- 4 days, when
switched on again, we strongly recommend performing
2/3 rinses before use;
It is normal for the grounds container (A10) to contain
water following a rinse cycle.
7.7 Tips for a hotter coee
To make a hotter coee, proceed as follows:
run a rinse cycle (see section “7.6 Rinsing ”);
warm the cups by rinsing them rst using the hot water
function;
increase the coee temperature (see section “12. Settings
menu”).
7.8 Adjusting the coee mill
The coee mill does not require any adjustment, at least initial-
ly, as it has been factory set to ensure that coee is prepared
correctly.
To make an adjustment while the coee mill is in operation,
turn the dial (A2) as follows:
If the coee is delivered too
slowly, or not at all.
This adjustment will not take ef-
fect until at least 2 cups of coee
have been delivered.
Turn one click towards “7”
For a fuller bodied creamier
coee
This adjustment will not take ef-
fect until at least 2 cups of coee
have been delivered.
Turn one click towards “1”
Please note:
The adjustment dial must be turned only when the coee mill
is in operation during the initial step of coee preparation.
7.9 Customising the quantity
in the
cup
1. Press the button relative to the drink being programmed
and hold for a few seconds: when the Led corresponding
to the selection starts ashing rapidly, the machine is in
programming mode. Delivery begins;
2. Once the cup is lled to the desired level, press the drink
button again. Delivery ceases and the quantity is stored
in the memory.
Please note:
To cancel the current setting, press a button corresponding to an
-
other drink
Loading ...
Loading ...
Loading ...