Loading ...
Loading ...
Loading ...
15
Component Frequency Procedure
Grounds container (A10)
When the indicator (B12) lights up,
the grounds container must be emptied:
the machine cannot now make coee.
• Remove the drip tray (A11), empty and clean.
• Empty the grounds container and clean thoroughly
to remove all residues that may have collected on
the bottom.
• Check the condensate tray (A14) (red) and empty
if necessary.
The appliance cannot be used to make coee again until the grounds container has been cleaned.
Even if not full, the empty grounds container message is displayed 72 hours after the rst coee has
been prepared. For the 72 hours to be calculated correctly, the machine must never be disconnected
from the mains power supply.
Drip tray components
The drip tray is tted with a oat indica-
tor, coloured red (A14), showing the level
of water it contains.
Before the indicator starts to project from
the cup tray (A13), the drip tray must be
emptied and cleaned
• Remove the drip tray and coee grounds container;
• Remove the cup tray and drip tray grille, then
empty the drip tray and the grounds container and
wash all components;
• Check the condensate tray, coloured red, and
empty if necessary;
• Put the drip tray complete with grille and grounds
container back in the appliance.
When removing the drip tray, the grounds container
must always be emptied, even if it has not lled up
appreciably.
Inside of the machine Check regularly (about once a month)
that the inside of the appliance (acces-
sible after removing the drip tray) is not
dirty.
Switch the machine o and disconnect from the power
supply. Never immerse the machine in water.
• Remove coee deposits with a brush and sponge;
• Remove all residues with a vacuum cleaner
Coee spouts (A15) Clean the coee spouts regularly (once a
month)
• Clean the coee spouts regularly with a sponge or
cloth;
• Check that the holes in the coee spout are not
blocked. If necessary, remove coee deposits with
a toothpick.
Loading ...
Loading ...
Loading ...